Radio Controlled cars, trucks and airplanes - Hobby Store London Ontario

HPI Racing 1/8 Ken Block WR8 Flux Ford Fiesta H.F.H.V.

Top Menu Line
Top Menu Bottom Line
Left Side Border
Left Side Border
Content Top Line

HPI Racing 1/8 Ken Block WR8 Flux Ford Fiesta H.F.H.V.


Chassis: 0.12" (3mm) thick silver anodized aluminum with composite front and rear braces and plastic side dirt guards
Drive: Four wheel shaft
Radio: HPI TF-40 2.4GHz 3-channel with steering and throttle end point adjustment, trim and dual rates, fail safe and SF10W waterproof analog steering servo
Motor: Flux Vektor 4000kV brushless
ESC: Flux Vapor Pro with reverse, cooling fan and fully programmable with the #100573 Castle Link USB Programmer, HPIC0573 (not included)
Differentials: Three, adjustable bevel gear type, oil filled
Shocks: Oil-filled, composite body with rear mud guards
Suspension: Front and rear sway bars, composite lower suspension arms and solid upper links
Tires: Scale Michelin Tarmac Rally, 1.4" (35mm) wide, 3.1" (80mm) diameter
Wheels: Tarmac Spec plastic 1.4" (35mm) wide, 2.2" (56mm) diameter, 12mm hex size
Ball Bearings: Full set Pinion Gear: 15 tooth
Spur Gear: 46 tooth composite
Body: Trimmed and painted white with all sponsor decals applied
Bumper: Front foam with plastic raised skidplate that allows car to slide over objects in the road
Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis
Camber: Non-Adjustable camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle


spacer Copyright 2004 -- Amazing Hobbies Inc. London Ontario